1. Home
  2. Solar

Your Electrical Panel: Homeowner’s Guide To The Breaker Box

Homeowner checking a circuit breaker in their electrical panel, aka breaker box or service panel, in preparation for home solar installation.
PublicadoOctober 28, 2021
ActualizadoOctober 22, 2024
AutorA picture of Andrew Giermak.Andrew GiermakWriter and EditorEditorRyan Barnett HeadshotRyan BarnettSVP, Policy & New Market Development
En este articulo
01.
What is an Electrical Panel?
02.
What Does an Electrical Panel Do?
03.
The Various Names for an Electrical Panel
04.
How Do Electrical Panels Work?
05.
Where Is the Electrical Panel Commonly Located?
06.
Reasons to Replace an Old Electrical Panel
07.
Tax Credits for Electrical Panel Upgrades
08.
The Relationship Between an Electrical Panel and Solar Panels
09.
Frequently Asked Questions

You can go months, maybe even years, without thinking about or opening your home electrical panel, but serves a vital purpose in your home, especially when it comes to safety. So when you need to check it, reset it, or flip it, it’s important to know at least the basics of what it’s doing. 

There are functions and terms it’s helpful for a homeowner to know. And there are signals it’s time to replace your electrical panel. If you’re considering home solar power or home electrification upgrades, there could be extra considerations. Knowing more about how electricity works in your home could protect you and your family from a dangerous situation. 

In the modern home, electrical panels are more than just a safety device that keeps electronics powered up: They are the brains of what can be an increasingly smart way to power the home.

See how much you can save with home energy changes

Step 01
Step 02
My electric bill is $290/mo

What is an Electrical Panel?

An electrical panel controls the flow of electricity to specific circuits around the house, and includes a protective fuse or circuit breaker for each circuit. Think of it as the brain of your home electrical system, as it connects the power from the electricity grid (and your home's solar panels, if you have them) to your outlets and appliances.

What Does an Electrical Panel Do?

An electrical panel distributes power around your home. Your outlets and switches are grouped together into circuits, which just means power flows out of the electric panel, through wires connecting the outlets and switches, and then back into the electric panel to form a complete loop, or branch circuit.

Your electrical panel is also designed to protect the home from electrical damage resulting from power surges and overloads.

  • A power surge occurs when the electrical current spikes beyond the expected range, such as when there is a lightning strike, a grid problem, or an issue with a large appliance.
  • An overload can happen when a circuit receives more amperage than it's built to handle, such as when numerous running appliances require more power than the panel can give. When the current moving through any given circuit breaker exceeds a set limit, the electric panel will automatically break the flow of power for that circuit to protect your home.

The Various Names for an Electrical Panel

Electrical panels often go by other names because of their function or appearance. Here are some of the more common names for this important part of your home’s electrical system, and why it may have been given that name:

  • Breaker panel or breaker box: It’s the location where the breakers live.
  • Circuit breaker, circuit breaker box, or circuit breaker panel: It’s the box where the circuit breakers are contained.
  • Distribution board or DB board: The panel is shaped like a board and it distributes power to the entire house.
  • Electrical service panel or electrical control panel: If your home’s electrical systems need servicing, this is the place where that work begins.
  • Fuse box: Before circuit breakers, home electricity was protected by fuses, so some people still call these fuse boxes.
  • Load center: It’s the central area where electrical loads are distributed through the house.

Panel board: The area inside the metal box that divides electrical power into different circuits.

How Do Electrical Panels Work?

To understand how electric control panels work, we can start with their anatomy, including the various components and the functions they perform.

Enclosure

This is the actual box containing the various components operating your electrical system. The electrical panel box is usually made from metal, typically gray in color, and usually has one or two doors covering the equipment and circuit wiring to restrict access to the home’s breaker box.

In addition to individual circuit breakers, the enclosure houses the ground bar or neutral bus, which is where the ground wires from each circuit are terminated.

The enclosure prevents water from getting onto the wiring, contains electrical discharges, and keeps dust and other pollutants at bay.

Main breaker

This switch controls the entire flow of current to your house, including power from utility companies. While you can manually flip it yourself, the breaker panel will automatically trip the main breaker to stop current flow whenever a major overload happens. In case of an electrical emergency at home, this is the switch you should flip to cut the supply of power to everything in your house.

See how much you can save with home energy changes

Step 01
Step 02
My electric bill is $290/mo

Single pole breakers

Single pole breakers (often 15 amp or 20 amp rated) facilitate power flow to your appliances and outlets, protecting them from electrical damage when there is a short circuit. If this component detects abnormal current, the breakers are designed to trip (flip to the off position) to stop the flow of electricity and ensure no damage is done to your electronics. As a result, they can safely stop a problem on one circuit without affecting power flow to the rest of the circuits.

Double pole breakers

Double pole breakers support the larger appliances in your house, such as an air conditioner, electric range, electric clothes dryer, electric water heater, and even hot tubs. Normally these breakers are wired to serve a single 240 volt circuit, but they can also be wired to serve two separate 120 volt circuits. A double pole breaker contains two hot wires with a single neutral wire, allowing the flow of electricity to be stopped if there’s an issue with either hot wire.

Arc fault circuit interrupters

An arc fault circuit interrupter (AFCI), also known as an arc fault detection device (AFDD), prevents electrical fires from breaking out inside your home by detecting issues before they can generate the heat and sparks that cause fire. Think of an AFCI like a smart breaker that contains filters and logic devices to detect problems. Electrical fires are difficult to detect unless you are on scene, so these circuit breakers identify arcs in electricity and respond automatically to stop power flow whenever the risk of fires is detected.

Empty slots

If you look closely at your breaker box, you might notice some blank spaces without a circuit breaker. These empty slots give you capacity to install additional circuits in the future if needed.

Subpanels

If you have a large home with multiple separate areas or wings that need electricity, a subpanel helps direct electricity more efficiently. Instead of running all of the circuits through one breaker panel, you can subdivide the distribution of your home’s electrical loads through these smaller panels designed for specific areas of your home.

Where Is the Electrical Panel Commonly Located?

Usually the electrical panel is located in a dry, indoor location away from the main household activities, to prevent it from being tampered with or accessed unintentionally and causing an electrical shock. In rare cases, the home electric panel may be located outside, though this is more common on older homes where the panel replaced an existing fuse box.

If you’re looking for your electrical panel, some likely locations include:

  • Garage
  • Basement
  • Closet
  • Hallway leading in from the home’s exterior
  • Kitchen pantry

Reasons to Replace an Old Electrical Panel

The primary reason to replace an electrical panel is safety. An old panel might overheat and be a fire hazard. It might not have more current parts such as AFCIs to detect and stop fire risks. An electrical panel’s lifespan can vary quite a bit, from 25-40 years. However, once a panel is up to 20 or more years, the clock could be ticking on it. If there’s rust, corrosion, or damage — perhaps from a major power surge — a replacement is likely the right decision. 

A too-old electrical panel increases the chance of it missing or not fully handling a surge or overload. This might not result in a total failure or fire, but it could damage systems or appliances in your home. 

Smart electrical panels give real-time monitoring data so you can see your energy usage and use that information to be more energy efficient overall. They’re still a relatively new, but growing option.

If you’re electrifying your home and adding aa lot of demand for electricity, you might need an upgraded, higher-capacity electrical panel capable of handling numerous 240-volt circuits. You might need 240v outlets for an EV charger and new electric appliances like a dryer, stove, water heater and heat pump.

Even without smart tech, a modern electrical panel will give your home higher electrical capacity which puts less strain on your home’s wiring and makes it more efficient. 

Meeting current codes and increasing home value are a couple more likely positives to scrapping a pre-moon landing electrical panel.

Tax Credits for Electrical Panel Upgrades

The federal government has a specific program, the electrical panel upgrade tax credit for qualified replacements of, or upgrades to, home electrical panels. The new panel has to have a capacity of 200 amps or more, is installed with new energy efficient appliances or improvements, and meet current electrical code. Qualifying purchases can earn tax credits worth 30% of the project cost up to a maximum credit of $600. The credit program is set to last until the end of 2032. (Everyone's tax situation is different. Discuss your eligibility with your own tax advisor.)

The Relationship Between an Electrical Panel and Solar Panels

To understand how your electrical control panel affects the installation of your solar panels, you should first know how solar energy works.

  1. Solar panels convert solar energy into electricity.
  2. Inverters convert the electricity from direct current (DC) into alternating current (AC) that your home and appliances can use.
  3. The electricity goes from the inverter to your breaker panel for distribution throughout the house.

Is your electrical panel solar ready?

Not every electrical panel is suitable for residential solar panel system installation, depending on its capacity ability to handle the electricity coming from the solar panels and the grid. You might need your solar company to upgrade your home's electric panel before going solar to ensure your solar panels can work effectively, and everything follows the electrical codes.

Fortunately, if you need a new electric panel before you can go solar, there are electrical panels specifically designed to be compatible with modern solar panels and all electrical codes. Solar-ready electrical panels have energy-monitoring functions that give you an overview of your home's electrical production and consumption.

If you’re unsure of whether or not your electric panel is solar-ready, contact Palmetto at (855) 339-1831 or our contact page. Or consult an electrician to review your home's electricity needs. You can also go to our Free Solar Estimate. Our solar energy experts will assess your home’s electricity needs and the status of your electrical systems, and give you the options you need to make the right decision for your family and home.

Frequently Asked Questions

Does home solar power work with electrical panels?

Yes, solar power works perfectly well with typical home electrical panels. There are times a new or higher-capacity electrical panel is recommended with installing a home solar power system.

Is an old electrical panel a safety hazard?

An old electrical panel might overheat and become a fire hazard. It’s also possible an old panel could not stop or only partially stop a power overload or electric surge. Old panels also might not have more current features such as arc fault circuit interrupters.

How does an electrical panel protect electric appliances?

Functioning electric panels protect appliances and any device or system connected to your electric grid by cutting off power surges before they reach outlets, wires, and appliances.

See what home electrification can do for you:

My electric bill is $290/mo

Disclaimer: This content is for educational purposes only. Palmetto does not provide tax, legal, or accounting advice. Please consult your own tax, legal, and accounting advisors.

Sobre el AutorA picture of Andrew Giermak.Andrew GiermakWriter and Editor

Andrew joined Palmetto in Charlotte in August 2024. He’s been a writer in journalism, then in business, going back to almost the 20th century. He’s lived in Indiana, Virginia, Pennsylvania, Virginia again, and now North Carolina for the last 12 years. He likes golf. Is he good at it? Not so much.

Lea más del Centro de aprendizaje de energía limpia

Palmetto es su recurso para noticias, actualizaciones y preguntas. El conocimiento es poder. Invierta con confianza.

Long Beach, CA Solar Guide with an outline of of California and an image of Long Beach in the background.

Long Beach Solar Guide: How You Can Save With Solar

If you’re looking for rooftop solar panels in Long Beach, understanding your potential to save is a key step.
San Diego, CA Solar Guide with an outline of California on an image of a San Diego beach.

Homeowner’s Guide to Rooftop Solar Panels: Incentives, Costs, and Solar Savings

Getting solar panels in San Diego could reduce your energy bill. Here’s what you need to know before installing solar and how you can find the best solar company in San Diego.
The words Chicago Solar Guide and an outline of Illinois with Chicago marked with the Chicago skyline in the background.

Chicago Solar Guide: Cost, Savings, and Finding the Best Solar Company

Thinking of going solar in Chicagoland? Here’s what you need to know about solar costs, solar savings, incentives, and maintenance before deciding.

See how much

you can benefit

by
going solar with Palmetto

$290
¿Cuál es su factura mensual de electricidad?